5000-গেজ হর্নবি SeTrack জন্য ট্র্যাক জ্যামিতি

আমি সম্প্রতি একটি দশকে একটি বিচ্ছেদের পর railwaying মডেল ফিরে. যেহেতু আমি গত অনুকরণে, কিছু যথেষ্ট পরিবর্তিত হয়েছে, মডেলিং সফটওয়্যার লেআউট সাবধানে আগাম ডিজাইন করা অনুমতি দেয় এমন ওয়াইড প্রাপ্যতা সাথে - নকশা নিশ্চিত মহাকাশে মাপসই করা হবে, এবং প্রয়োজনীয় ট্র্যাক পাওয়া যায় যে.

ট্র্যাক নিরিখে, সবচেয়ে প্রতিমূর্তি Now সহ কারণে অনেক কাজ করার জন্য Peco প্রবাহরেখা ট্র্যাক সুপারিশ: এটা ভাল চলমান বিশ্বাস করা হয়, বিন্দু ব্যাসার্ধ এতো বড় Locos এর উচ্চ গতির চলমান জন্য আরো উপযুক্ত, এবং সেখানে আগে থেকেই তৈরি করা ট্র্যাক টুকরা বৃহত্তর পরিসর উপলব্ধ. সব যে বলেন, I still have a large col­lec­tion of SeTrack so I decided to design my lay­out to work with this track to avoid the cost of repla­cing it with new­er Streamline.

SeTrack সঙ্গে একটি মৌলিক বৃত্ত নির্মাণের যথেষ্ট সহজ, কিন্তু আরো জটিল বিন্যাস চতুর হতে পারে, তাই আমি কিছু মানক জ্যামিতি বিন্যাস আমাকে সাহায্য করতে Google এ দেখার সিদ্ধান্ত নিয়েছি. হর্নবি মোটামুটি মৌলিক বিন্যাস নিজেদের যা বাঁকা পয়েন্টের জন্য আংশিকভাবে দরকারী প্রদান, কিন্তু আমি অন্য কোন জ্যামিতি সাইট যা সঠিক জ্যামিতি ব্যাপক সেট অন্তর্ভুক্ত খুঁজে পেতে অসমর্থ ছিল. সেরা আমি খুঁজে পরিচালিত ছিল FreeTrackPlans.com যা খুব দরকারী আদ্যস্থল ছিল, but sadly includes sev­er­al examples which don’t actu­ally fit very well together.

নীচে ট্র্যাক জ্যামিতি বৃহৎ সেট আমি AnyRail মধ্যে পরিকল্পিত করেছেন 5. AnyRail পরিকল্পনা হয় সহজলভ্য. তবে আমি দৃষ্টান্ত যেখানে সমস্যা সোজা টুকরা যা আংশিক অত্যন্ত ছোট দ্বারা ঘটিত হয় এইসব অসম্পূর্ণতা সীমাবদ্ধ করেছেন - আমি সেখানে যে নীচে কিছু উদাহরণ টেকনিক্যালি পুরোপুরি মাপসই করা হবে না আছে সচেতন থাকা আবশ্যক. আমি বিশ্বাস করি একটি বাস্তব জগতে মডেল এই ত্রুটির এটা যে বিষয়টি অভ্যস্ত এত ছোট যে, এবং একটি মুর্তিকার সহজে একটি লম্বা সোজা টুকরা ব্যবহার করে এবং দৈর্ঘ্য তা কেটে তাদের সংশোধন করতে পারে উপরন্তু যে. এই ধরনের খুব ছোটখাট অমিল প্রশ্নে যুগ্ম গোলাপী হাইলাইট করা হয়. সব ধরনের অসম্পূর্ণতা AnyRail সহনশীলতাই মধ্যে রয়েছে - তাদের ম্যানুয়াল বলেছেন: "কখনও কখনও আপনি খেলা ব্যবহার করে ট্র্যাক হইয়া করতে পারেন (আন্দোলিত কক্ষ) ট্র্যাকে. এই প্রতারণার বিবেচনা করা যেতে পারে যদিও, কখনও কখনও আপনি এমনকি নজরে আসে না আপনি যা করছেন তা ঠিক যে যখন বাস্তব ট্র্যাক ডিম্বপ্রসর ".

আপনি প্রতিটি জ্যামিতি প্রান্তে লেভেল ক্রসিং অনেকটা খেয়াল করতে পারেন - এই প্রকট উপস্থিত যে প্রান্তে ট্র্যাক দৈর্ঘ্য সমান এবং SeTrack জন্য সঠিক 67mm সমান্তরাল বিচ্ছেদ হয়.

Where shown the grid lines illus­trate 50cm squares for scale purposes

খেয়াল করা এক শেষ জিনিস হো এবং OO যেমন পণ্য গেজ ট্র্যাক মান জন্য নিম্নলিখিত বিশেষ উল্লেখ. নিচে জ্যামিতি 67mm হর্নবি / SeTrack জন্য, 50mm Peco / প্রবাহরেখা জন্য না

4মিমি OO যেমন পণ্য গেজ ট্র্যাক জ্যামিতি - হর্নবি স্ট্যান্ডার্ড, Peco Setrack, & Bach­mann Branchline

  • ট্র্যাক গেজ: 16.5মিমি
  • ট্র্যাক ব্যবধান: 67মিমি (কেন্দ্র-টু-কেন্দ্র)
  • ট্র্যাক ব্যবধান: 37.5মিমি (নিদ্রা প্রান্ত থেকে আরেক প্রান্ত পর্যন্ত)
  • ট্র্যাক প্রস্থ: 16.5মিমি (রেল-টু-রেল)
  • রেল উচ্চতা: code 100
  • টার্নআউট কোণ: 22.5°
  • 1St বক্ররেখা ব্যাসার্ধ: 371মিমি
  • 2য় বক্ররেখা ব্যাসার্ধ: 438মিমি
  • 3য় বক্ররেখা ব্যাসার্ধ: 505মিমি
  • 4 বক্ররেখা ব্যাসার্ধ: 571.5মিমি

4mm HO Gauge track geo­metry — Peco Streamline

  • ট্র্যাক গেজ: 16.5মিমি
  • ট্র্যাক ব্যবধান: 50মিমি (কেন্দ্র-টু-কেন্দ্র)
  • ট্র্যাক ব্যবধান: 20.5মিমি (নিদ্রা প্রান্ত থেকে আরেক প্রান্ত পর্যন্ত)
  • ট্র্যাক প্রস্থ: 16.5মিমি (রেল-টু-রেল)
  • রেল উচ্চতা: কোড 100, 83 or 75
  • টার্নআউট কোণ: 12°
  • 1St বক্ররেখা ব্যাসার্ধ: 371মিমি *

*স্ট্রিমলাইন ট্র্যাক নির্দিষ্ট বক্রাকার টুকরোগুলি দিয়ে আসে না, কিন্তু, পেকো তাদের সেটর্যাক হিসাবে বিজ্ঞাপন দেয় 100% স্ট্রিমলাইন কোড 100 এর সাথে সামঞ্জস্যপূর্ণ 37 RTR models.

আপডেট

  • 24-সেপ্টেম্বর 2015: যোগ করা 15 নতুন জ্যামিতি, স্টেশন বেশিরভাগই
  • 9-Mar-2017: যোগ করা 8 নতুন জ্যামিতি
  • 19-জুন-2020: স্ট্রিমলাইন ট্র্যাক বক্ররেখা স্পষ্ট

হর্নবি 4 ট্র্যাক লুপ মান মাত্রা

মান-ট্র্যাক-লুপ

স্ট্যান্ডার্ড সমান্তরাল টার্নআউট বা ভোটদানের হার জ্যামিতি

মান-যমজ ট্র্যাক-ডাবল টার্নআউট বা ভোটদানের হার-সমান্তরালমান-সোজা-টার্নআউট বা ভোটদানের হার

এক্সপ্রেস সমান্তরাল টার্নআউট বা ভোটদানের হার জ্যামিতি

একক-টু-টুইন-ট্র্যাক-এক্সপ্রেস-বিভক্তপ্রকাশ-যমজ ট্র্যাক টু ট্রিপল ট্র্যাক-প্রতিসমপ্রকাশ-যমজ ট্র্যাক টু ট্রিপল ট্র্যাকপ্রকাশ-যমজ ট্র্যাক-সুইচপ্রকাশ-যমজ ট্র্যাক-ডাবল টার্নআউট বা ভোটদানের হার-সমান্তরাল

কৌণিক টার্নআউট বা ভোটদানের হার জ্যামিতি

যমজ ট্র্যাক-ডাবল টার্নআউট বা ভোটদানের হার-কৌণিকপ্রকাশ-যমজ ট্র্যাক-ডাবল টার্নআউট বা ভোটদানের হার-কৌণিক

বাঁকা টার্নআউট বা ভোটদানের হার জ্যামিতি

ট্রিপল টার্নআউট বা ভোটদানের হার অন বক্ররেখাকম গতিসম্পন্ন-টার্নআউট বা ভোটদানের হার অন বক্ররেখাচতুর্গুণ-টার্নআউট বা ভোটদানের হার অন বক্ররেখাপ্রকাশ-টার্নআউট বা ভোটদানের হার অন বক্ররেখাযমজ ট্র্যাক-ডাবল টার্নআউট বা ভোটদানের হার অন বক্ররেখাডবল ট্র্যাক-কম-গতি-যমজ টার্নআউট বা ভোটদানের হার অন বক্ররেখাডবল ট্র্যাক-এক্সপ্রেস-যমজ টার্নআউট বা ভোটদানের হার অন বক্ররেখাযমজ ট্র্যাক-ডাবল 90 ডিগ্রি-টার্নআউট বা ভোটদানের হারযমজ ট্র্যাক-এক্সপ্রেস-ডাবল 90 ডিগ্রি-টার্নআউট বা ভোটদানের হার

এক্স ‑ ক্রসিং এবং সিچی-ক্রসিং জ্যামিতি

যমজ ট্র্যাক-ডাবল এক্স-পারাপারযমজ টু ট্রিপল ট্র্যাক-পাশ-বিন্দুযমজ ট্র্যাক-এক্সপ্রেস-কাঁচি-পারাপারযমজ ট্র্যাক-কাঁচি-ক্রসিং-অফসেট

Y ‑ সংযোগ এবং টি ‑ জংশন জ্যামিতি

যমজ ট্র্যাক-কম-গতি-টি-সম্মিলনযমজ ট্র্যাক-এক্সপ্রেস-ওয়াই-সম্মিলনযমজ ট্র্যাক-এক্সপ্রেস-টি-সম্মিলনসহজ-যমজ ট্র্যাক-3-পথ-সম্মিলনসিঙ্গল ট্র্যাক-3-পথ-সম্মিলন

বেসিক স্টেশন জ্যামিতি

মান-2-প্ল্যাটফর্ম-স্টেশন-টার্নআউট বা ভোটদানের হারপ্রকাশ-2-প্ল্যাটফর্ম-স্টেশন-দ্বীপসমন্বয়-দ্বীপ-স্টেশন -3সমন্বয়-দ্বীপ-স্টেশন-2সমন্বয়-দ্বীপ-স্টেশন-1প্রকাশ-2-প্ল্যাটফর্ম-স্টেশন-টার্নআউট বা ভোটদানের হার

মেজর স্টেশন জ্যামিতি

যমজ ট্র্যাক-দ্বীপ-স্টেশন-সঙ্গে-ডাবল বাইরে-বাইপাসযমজ ট্র্যাক-3-প্ল্যাটফর্ম-এক্সপ্রেস-স্টেশনঅফসেট-যমজ ট্র্যাক-এক্সপ্রেস-4-প্ল্যাটফর্ম-স্টেশনযমজ ট্র্যাক-এক্সপ্রেস-4-প্ল্যাটফর্ম-স্টেশন-সঙ্গে-1-বাইপাস ট্র্যাকযমজ ট্র্যাক-4-প্ল্যাটফর্ম-স্টেশন-সঙ্গে-2-বাইপাস-গানগুলিযমজ ট্র্যাক-4-প্ল্যাটফর্ম-স্টেশন-সঙ্গে-1-বাইপাস ট্র্যাকযমজ ট্র্যাক-5-প্ল্যাটফর্ম-স্টেশন-সঙ্গে-1-বাইপাস ট্র্যাক

বাঁকা স্টেশন জ্যামিতি

যমজ ট্র্যাক-2-প্ল্যাটফর্ম-স্টেশন অন বক্ররেখাডবল ট্র্যাক-3-প্ল্যাটফর্ম-স্টেশন অন বক্ররেখাডবল ট্র্যাক-3-প্ল্যাটফর্ম-স্টেশন অন বক্ররেখা-সঙ্গে-বাইপাস

টার্নটেবিল জ্যামিতি দিয়ে টার্মিনাস স্টেশন

যমজ ট্র্যাক-4-প্ল্যাটফর্ম-টার্মিনাস-সঙ্গে-টার্নটেবিল-এবং-বাইপাস ট্র্যাকযমজ ট্র্যাক-3-প্ল্যাটফর্ম-টার্মিনাস-সঙ্গে-টার্নটেবিল

টার্নটেবিল জ্যামিতি

টার্নটেবিল-টু-4-সমান্তরাল-গানগুলি

4ওয়েস্ট জংশন জ্যামিতি

যমজ ট্র্যাক-90-ডিগ্রী-আন্ডারপাসযমজ ট্র্যাক-90-ডিগ্রী-ক্রস অফসেট -2যমজ ট্র্যাক-90-ডিগ্রী-ক্রস অফসেট -1যমজ ট্র্যাক-90-ডিগ্রী-ক্রসিং-সহজ-2যমজ ট্র্যাক-90-ডিগ্রী-ক্রসিং-সহজ-1যমজ ট্র্যাক-90-ডিগ্রী-ক্রস 2যমজ ট্র্যাক-90-ডিগ্রী-ক্রস -1সহজ-4-পথ-সম্মিলন

অন্যান্য জ্যামিতি

যমজ ট্র্যাক-প্রকাশ-ডাবল টার্নআউট বা ভোটদানের হার-সঙ্গে-আন্ডারপাস

অনুরোধ দ্বারা জ্যামিতি

নীচের অন্য লেআউট কোন অনুরোধ পোস্ট করুন.

উত্তর দিন

50 মন্তব্য

একটিঅ্যান্ড্রু

হাই জোন, fan­stast­ic resource thanks for pro­du­cing this. I’m strug­gling with try­ing to get a R8074 to run into a par­al­lel through sta­tion. For example try­ing to use Ropley on Mid Hants Rail­way as example. Is it pos­sible? I can get close if i use R8077 and a R600 + R628.

উত্তর
SBসাইমন বাকলি

প্রিয় জন কিছু পরামর্শ দিতে সক্ষম হবে. I would like to mod­el Brad­ford exchange sta­tion in the 1930’s par­tic­u­larly around the the St Dun­stans junc­tion which is a tri­an­gu­lar loop. If I can cre­ate the space I would like to include the ham­mer­ton junc­tion and the run back down to the Adol­phus street goods station

উত্তর
JSজন Scaife

Hi Simon

I recom­mend look­ing for old maps of the area, import­ing them into any­rail as an image, and then lay­out out track over the top — that is how I cre­ated the lay­outs for the shef­field sta­tions that I have shared. If you need spe­cif­ic advice about any­thing do ask

উত্তর
এসScott

Hi there, some really good points and graph­ics here.
My ques­tion is.

I want a low level non-scen­ic return loop. I believe I can use 2য় radi­us curves. My biggest loco is a B12 4−6−0 with a max­im­um train length of 3 thompson carriages.

I also want to hold a train there, while a second one passes through. Or hold either one, while the oth­er moves off. I have a length of just under 8ft, as my lay­out is just under 8ft by just under 10ft.

This will be a low level affair so I can have a double track main level with an upper level branch. Hope you under­stand my ques­tion thanks

উত্তর
Mমনিক

হাই জোন
I have a OO gauge Hornby Fly­ing Scots­man R1167 (কোড 100) set and a HO gauge Life-Like Uni­on Pacific T8608AA (কোড 83?) set.
Is it feas­ible to join them to use in two loops or will the change in track height cre­ate problems?
This idea is more about util­ising the track I have than run­ning both OO and HO loco­mot­ives together.
Appre­ci­ate your suggestions.
মনিক

উত্তর
JSজন Scaife

Hi Monique
There is a good chance you’ll have prob­lems run­ning the code 100 কোডে লোকো 83 track as older mod­els often have deep­er flanges on the wheels. The HO loco will almost cer­tainly run fine on code 100 track if it runs on code 83 track.
I’d highly recom­mend test­ing the Fly­ing Scots­man on code 83 track before com­mit­ting to any­thing as it may well “ride on the ties” or have issues with turnouts and frogs. If you find it works reli­ably then there is no reas­on you can­’t mix track for use with both locos. If you have old rolling stock that does­n’t like the code 83 track it is easy to switch the wheels to ones with smal­ler flanges. I would­n’t want to try swap­ping wheels with locos though, it would prob­ably involve a lot of pre­ci­sion DIY.
There are products out there that will allow you to join code 83 to code 100 track without an issue, উদাঃ. Atlas rail join­ers with product code 551. If you have code 75 track then Peco make a track join­er for code 75 to 100 too.
Assum­ing everything does work then I would recom­mend using code 83 on scen­ic sec­tions and code 100 for fiddle yards as the code 83 will look more realistic.

উত্তর
Tমনিক

I attemp­ted to recre­ate the angled turnout geo­metry (the smal­ler of the three) and for some reas­on it does not appear to fit. the R614 cros­sov­er com­bined with the R8072 switches do not pre­serve the dis­tance between tracks to match the R636 Level Cross­ing both on the straight and angled areas. I am using SCARM though and not Any­Rail (I assume you used that one) so the two pro­grams may have dif­fer­ent dimen­sions for the indi­vidu­al pieces but I don’t want to invest in the actu­al pieces or com­mit to the design only to find out they won’t fit on final assembly.

উত্তর
এসStuart

A tip picked up from Mod­el Rail is the Hornby 2য় ব্যাসার্ধ 1/4 curves can be used with the Y points to give a longer straight and min­im­al 50mm between centres.
ALL the Hornby radii can be used to cre­ate a diminishing/increasing radi­us curve which can be use­ful inform­a­tion when link­ing scen­ic and non-scen­ic sec­tions of a layout.
Hornby Large radi­us R8077 & R8078) and Y points (R8076) can be used in com­bin­a­tion for release roads at ter­min­al sta­tions, with the Y con­nect­ing to the diver­ging of the large radi­us points.
Any single Hornby 45degree curve R1 — R4 will con­nect to the diver­ging branches of short Hornby points (R8072 & R8073) the infin­ite radi­us link being formed by a cut length of R621 Flex a use­ful fix when work­ing in O‑16.5 and oth­er light/tramways were odd point-work arrange­ments were used to access water tanks or provide loco stabling off of the single mainline.
Sim­il­arly and half curve (22.5degrees) will work in sim­il­ar fash­ion in com­bin­a­tion with large radi­us points.
Any­rail is use­ful to set out the basic prin­ciples of what sec­tion works with which com­pon­ent to con­struct your needs.
Sec­tion­al track gets a bit of an iffy press BUT it can also provide a work round due to it’s con­stant arc be it 11.25, 22.5 অথবা 45 degrees.

উত্তর
JSজন Scaife

হাই স্টুয়ার্ট

That’s really good info thanks.

For any­one new to mod­el­ling I would­n’t gen­er­ally recom­mend SeTrack any­way, it’s just there is a lot of it out there that is still per­fectly usable and for “toy train” lay­outs as opposed to “mod­els” it’s quick­er and easi­er to get a work­ing layout.

উত্তর
JSজন Scaife

Hi Richard

I’m not sure exactly what you mean. I assume you don’t want to con­struct a cas­sette or slid­ing sys­tem — you’re look­ing for a 16-road fixed yard?

But I’m not sure what you mean by “eco­nom­ic for point space”?

Is this for a scen­ic area — i.e. a mod­el of a mar­shalling yard, or is it for an off-scene area?

Assum­ing it’s for an off-scene area you pre­sum­ably don’t care about pro­to­typ­ic­al oper­a­tion — you just want to max­im­um ‘stor­age’ in th emin­im­um space or with the min­im­um num­ber of points?

Are you want­ing some­thing double ended (i.e. with a through-track for a loop) or some­thing ‘dead-end’? How many tracks do you need lead­ing into each end?

উত্তর
RNরিচার্ড নোবেল

Hi ya
Many thanks for com­ing back to me!
The mar­shalling yard is a back­ground area.
I’m extremely pushed for space, in that I want to store 8 coach trains which is fine except that the points are tak­ing up to much space that I haven’t got? So basic­ally I need to get my 16 lanes in the shortest way pos­sible with the points over­all length
Hope that makes sense?
The less space wasted with the points length the better
Many Thanks again
Richard

উত্তর
JSজন Scaife

Hi Richard
That makes sense. It sounds like you want a ‘sta­ging yard’ specifically

Are you using Horny SeTrack or some­thing else (উদাঃ. Peco প্রবাহরেখা)?
How many tracks do you have com­ing in? Just 1 or more? E.g. if you have 2 could you have 2 sep­ar­ate 8‑lane sec­tions. Or do you need to feed all 16 lanes into 1?
Is it just con­nec­ted at one end or at both ends — i.e. does it need to have a run through part?

Assum­ing a single track entry with no pass-through the shortest length I can see so far would have the points take up 1m of length before your straight sec­tions. 8‑coach trains would be about 2.5m long includ­ing a single-engine or a bit longer for MUs so you’d be look­ing at a total length of 3.5m and a width of ~1.6m. I’ve included a design below.

If you are tight for space you might be bet­ter with a tra­vers­er or elev­at­or. Have a look at https://modelrailwayengineer.com/fiddle-yards/ for dif­fer­ent pos­sible approaches

16-road staging yard model railway

উত্তর
JSজন Scaife

Hi Richard

After think­ing about this some more I came up with an improved design. The length is mar­gin­ally short­er but the main bene­fit is that the width is smal­ler (around 1m rather than around 1.6m) which means the fur­thest tracks will be much easi­er to reach. Note that the light blue parts are shown for design pur­poses but actu­ally form part of the roads them­selves, so the point­work is less than 1m long

If any­one has any thoughts on a more effi­cient design please let me know

উত্তর
JSজন Scaife

হাই ক্রিস. Agreed — FreeTrackPlans.com is great. I’ve gen­er­ally tried to avoid duplic­a­tion of the info they provide so I can recom­mend a good look at the many plans they have

উত্তর
ISআয়েন স্মিথ

Hi Jon — really great site — thanks. I am new to using Any­Rail — and plan­ning first layout.Reference the ‘geo­met­ries by request’ sec­tion — top line — second from left — could you post the angle and radi­us of the vari­ous R621 sec­tions you are using, please? I am hav­ing a prob­lem rep­lic­at­ing the dia­gram on Any­rail. Would be much appreciated.

উত্তর
JSজন Scaife

Hi Iain

There are 4
The one next to the road-cross­ing on the R4 curve is r=54, a=17.5
The one below it on the R3 curve is r=56.5, a=17.5
The longer one on the R4 curve is a cus­tom adjus­ted smooth curve with rmin=52.68
The final one — at the bot­tom of the R3 curve is r=56.5, a=17.5

Hope that helps. If not I can send the .any file over, just let me know

উত্তর
JJeff

Would it be pos­sible to incor­por­ate a R8075 point on a 4 radi­us R8262 so as to cre­ate a spur off and then to effect­ively have the inner curve back on align­ment (presently a com­plete 180 degree 4 radi­us curve) pos­sibly by hav­ing short R410’s pri­or to the point? অনেক ধন্যবাদ.

উত্তর
JSজন Scaife

Hi Jeff

I assume you mean on the stand­ard Hornby 4‑track loop or equi­val­ent 180 curve?

যদি তাই হয় তবে হ্যাঁ, although not without cut­ting one of the R610’s short. I assume you mean R610’s?

You need to use R610 -> R8075 -> R610 -> R610 (cut short) -> R643. This will have the same start and end points as a 90 degree 4 radi­us corner. Note that it does include the 2য় radi­us R643.

If you wanted to achieve the same thing without the R643 you could use flexitrack to cre­ate a piece with a stand­ard 4 radi­us of 572mm and a curve of 11.25 degrees. It is a shame Hornby don’t make one of these as stand­ard as it would fit near per­fectly in a pat­tern of R610 -> R8075 -> flexipiece which would form a smooth­er curve also of 90 degrees and fit­ting into place of a 4 ব্যাসার্ধ 90 degree turn

অবশ্যই, flexitrack is a good idea any­way as you can then include ease­ments which both look bet­ter and improve smooth running

উত্তর
IHIan Hunter

Can you tell me the thick­ness (under­side of sleep­er to top of rail) of Peco 00/H0 Stream­line Code 100 track? Every mil­li­metre counts as I attempt estab­lish the gradi­ents on a lay­out that I am planning!
Thankyou.

উত্তর
Bবিল

আকর্ষণীয় ধন্যবাদ, তবে নোট করুন যে পেকো স্ট্রিমলাইনটি বাঁকা ট্র্যাক করে না তাই নমনীয় ট্র্যাকের জন্য সর্বনিম্ন ব্যতীত রেডিয়ি থাকতে পারে না, এবং এই রেডিওগুলি 50 মিমি দূরে নয়.

পয়েন্টগুলির জন্য বক্ররেদী 610 মিমিতে 'ছোট' / 2 পা, 914 মিমিতে ‘মিডিয়াম’ / 3 1524 মিমি এ পা এবং 'বৃহত্তর' / 5 পা.

বিন্দু কোণ যুক্ত করার পরামর্শ দিন, 22.5Orn হর্নবাইয়ের জন্য, 12Ec পেকো এস এর জন্য

উত্তর
JSজন Scaife

ধন্যবাদ বিল. আমি বক্ররেখার উপর একটি ব্যাখ্যা যুক্ত করেছি এবং আপনার পরামর্শটি বিন্দু কোণগুলিতেও যুক্ত করেছি.

উত্তর
এসস্টিভ

খুব পুরাতন বয়সে আবার শুরু করার জন্য খুব দরকারী তথ্যের জন্য ধন্যবাদ 64 Ive finally got the space and the time. now.

উত্তর
SMস্টুয়ার্ট চাঁদ

জন, দৃষ্টান্তের জন্য ব্যবহৃত গ্রিডটি 12 set সেট করা আছে তা কি নিরাপদ? (305) যদি না হয় আপনি কোন স্কেল নিয়োগ করেছেন?

উত্তর
JSজন Scaife

হাই স্টুয়ার্ট. একজন প্রাক্তন পদার্থবিজ্ঞানের শিক্ষক হিসাবে আমি মেট্রিক সিস্টেমটি খুব গ্রহণ করেছি (এবং আমি বিশ্বাস করি যে অ্যানরেইল সফ্টওয়্যার জার্মানি থেকে) সুতরাং পরিমাপগুলি সমস্ত মেট্রিক. যেখানে তাদের গ্রিড লাইনগুলি 500 মিমি স্কোয়ারের চিত্রিত করা হয়.

উত্তর
Rগাদা

দুর্দান্ত সম্পদ! এমনকি ফ্লাইটট্র্যাক ব্যবহার করে আপনাকে উপযুক্ত মাত্রাগুলি জানতে হবে এবং নতুন ট্র্যাকটিকে অনুসরণ করার জন্য আকৃতি দেওয়ার জন্য ট্র্যাকের অপ্রয়োজনীয় মরিচা পুরানো বিটগুলির একটি বোঝা একটি টেম্পলেট হিসাবে ব্যবহার করা যেতে পারে. ধন্যবাদ.

উত্তর
TTrebobster

কনফিগারেশনগুলির দ্রুত রেফারেন্সিংয়ের জন্য পবিত্র গ্রেিল. Very much appre­ci­ate the amount of work put in and thank you for sharing.

উত্তর
একটিঅ্যালান

গ্রেট সাইট খুব মৌলিক নকশা তথ্য দেওয়ার সহায়ক, আপনার প্রচেষ্টার জন্য ধন্যবাদ. আমার একটা প্রশ্ন আছে?
আমি ঠাহর করা হলে পাশ সাথে যোগ দ্বারা ট্র্যাক পার্শ্ব দুই চেনাশোনা নেই সম্ভব চেষ্টা করছি 4 বাঁকা পয়েন্ট তাই সার্কেল আলাদাভাবে চলবে বা সুইচ পয়েন্ট সঙ্গে একটি চিত্র তৈরি করতে 8. পয়েন্ট সঙ্গে একটি এক্স ক্রসিং প্রতিস্থাপন অন্য কথায়. Thanks for any guidance.

উত্তর
JSজন Scaife

এটা অবশ্যই একটি একক ট্র্যাক লুপ সঙ্গে সম্ভব. একটি ডবল ট্র্যাক লুপ আরো জটিল হবে. আমি একক ট্র্যাক চিত্র 8 ডলার যুক্ত করেছি / double loop layout

উত্তর
Nনিল

এই জন্য ধন্যবাদ. I would sug­gest mov­ing the curved cros­sov­er to its own diagram.
সেখানে একটি জ্যামিতি করে একটি দেয় 2য় একটি ব্যাসার্ধ বক্ররেখা 3য় অথবা 4 ব্যাসার্ধ বৃত্ত? কিছু একটি উপর বক্ররেখা সঙ্গে পয়েন্ট করার অনুমতি 3য় ব্যাসার্ধ বৃত্ত.

উত্তর
JSজন Scaife

আমি নিশ্চিত যেটি "বাঁকা সমম্বয়" আপনি উল্লেখ করা হয় নই.
আমিও বেশ কিছু না আপনি একটি দ্বারা কি বোঝাতে চেয়েছেন আছি 2য় একটি ব্যাসার্ধ বক্ররেখা 3য় অথবা 4 ব্যাসার্ধ বৃত্ত? তাই এখানে বিভিন্ন সম্ভাব্য উত্তর হয়
(1) মান Hornby বৃত্ত দেখায় একটি 2য় থেকে ব্যাসার্ধ 3য় radi­us curved turnout geometry.
(2) আমি একটি কাজ করতে কোন উপায় সচেতন নই 3য় থেকে 4 flexitrack ব্যবহার না করেই একটি বক্ররেখা উপর ব্যাসার্ধ. flexitrack এটা করা সম্ভব সঙ্গে.
(3) তাহলে আপনি কি বলতে চান এটা সম্ভব ব্যবহার করতে 2য় ব্যাসার্ধ রেখাচিত্র একটি মধ্যে একটি অভ্যন্তরস্থ বাঁক বিন্দু মাপসই স্থান সক্রিয় করতে 3য় অথবা 4 ব্যাসার্ধ তারপর ঘুরে হ্যাঁ এটা - আপনি শুধু এই কাজ করতে মান হর্নবি লুপ পরিবর্তন পারে, অথবা এটি একটি আরো কম্প্যাক্ট উপায়ে তা কি সম্ভব.
আমি জুড়েছেন 2 অতিরিক্ত জ্যামিতি করতে কিভাবে দেখানোর জন্য (2) flexitrack এবং (3) সঙ্গে একটি 3য় ব্যাসার্ধ, altho এটি একটি একেবারে নিখুঁত ফিট নয় এটা বন্ধ যথেষ্ট বাস্তব জগতে হতে হবে.

উত্তর
TBটিম ব্লেক

আমরা স্থানীয়ভাবে দানকৃত উপাদানগুলি থেকে স্থানীয় শিশুদের দাতব্য প্রতিষ্ঠানের জন্য তহবিল সংগ্রহের জন্য শিশু-বান্ধব বিন্যাস তৈরি করছি, তাই আপনার তথ্য বিন্যাস নকশা setrack রেখাচিত্র ব্যবহার করার জন্য বিশেষভাবে উপকারী ছিল.

উত্তর
JSজন Scaife

দারুণ. আপনার প্রতিক্রিয়ার জন্য ধন্যবাদ. আমরা সবসময় কিছু দাতব্য জন্য 'বিজ্ঞাপন' স্বাগতম, তাই আমাদের জানতে এটি সম্পর্কে আরও দিন বিনা দ্বিধায়.
চিয়ার্স

উত্তর
Nনিগেল

জন, আপনার কাজের জন্য ধন্যবাদ, লজ্জা আমি তো আমার ট্র্যাক স্থাপন শুরু পর আবিষ্কৃত. আপনার কাজ, কিন্তু, has been use­ful in cor­rect­ing my track lay­ing mistakes.

উত্তর
Lলেস্টার

ধন্যবাদ জন, This has been really help­ful… I’m now going to sit down and digest much of this and then try in Any­Rail to cre­ate my own solu­tions based on the ones you’ve provided here! 🙂

উত্তর
JSজন Scaife

ব্যাসার্ধ 4 ব্যাসার্ধ 572mm - তাই মোট ব্যাস 1144mm হতে হবে (1.15m অথবা 45 উচ্চতা). যে ট্র্যাক কেন্দ্র হয়, তাই আপনি শারীরিক প্রয়োজনীয় স্থান জন্য একটি ছোট পরিমাণ যোগ করতে হবে চাই. আমি হয় সাইড এ অর্ধেক একটি ট্র্যাক প্রস্থ উপর যোগ করার সুপারিশ করছি, এবং হয় সাইড এ অর্ধেক একটি ট্র্যাক ব্যবধান. যে স্থান 1228mm একটি সর্বোমোট প্রয়োজন দেয় (1.23m অথবা 48 1/3 উচ্চতা). আমি যে উপরের নিজেকে থাকা ত্রুটির জন্য একটু মার্জিন চাই চাই.

উত্তর
BGবব Goodsir

হাই,
এটার দিকে ব্রতী আপনাকে বোর্ডে আমি appx সামগ্রিক আকার নিশ্চিত করতে পারেন হচ্ছে।, ই. 1.3মি এক্স 1.3 মিটার হর্নবি মান etc.for 4 লুপ ট্র্যাক.
অনেক ধন্যবাদ.
দোলক

উত্তর
JSজন Scaife

গ্রিড স্কোয়ার 50cm x এর তাই মান 50cm হয় 4 ট্র্যাক লুপ প্রায় 1.4m এক্স 2m হয়.
যুক্তিসঙ্গত ট্র্যাক ক্লিয়ারেন্স মত একটি বোর্ড 1.25m এক্স 1.9m সম্মুখের দেখানো এটা লাগানো যেতে পারে - আরও ভালো আমি AnyRail এটা পরিমাপ করা.

উত্তর
Gগ্রায়েম

সুপার আইটেমটি, জন. দুঃখিত যদি আমি তা এখানে মিস করেছি, কিন্তু আপনি যখন ট্র্যাক ব্যবধান উল্লেখ, 50mm যেমন উদাঃ H0, কিভাবে যে স্থান পরিমাপ করা হয়? এটিকে দুটি ট্র্যাকের লোকজনের বলুন বা প্রান্ত মধ্যে স্থান নেই, ট্র্যাক কেন্দ্র থেকে কেন্দ্র ট্র্যাক করতে?

উত্তর
Tটাকা

এটি করার জন্য আপনাকে ধন্যবাদ, এটা সাহায্য করেছে আমাকে বুঝতে পারছি কি অর্জন করা যেতে পারে.

উত্তর