200-12ft এক্স 8ft একটি ট্রিপল লুপ জন্য SeTrack লেআউট মূল্যাবধারণ

নীচে একটি লেআউট যা 12ft এক্স 8ft একটি আদর্শ চালা মধ্যে একটি ট্রিপল লুপ নকশা ফিট হয়. এই প্রতিটি স্টেশনের মধ্যবর্তী রানের একটি ভাল দৈর্ঘ্য দেয় এবং এখনও সমগ্র লেআউট পৌঁছানোর এবং কিছু দৃশ্যাবলী যোগ করার জন্য স্থান প্রচুর ছেড়ে.

সর্বাধিক গ্রেডিয়েন্ট 2%.

12ftx8ft-ট্রিপল লুপ

যেকোনওরাইল 6 এর জন্য ডাউনলোড করুন

উত্তর দিন

2 মন্তব্য

JSজিম শেফফিল্ড

জন, I came across your web­site recently and was intrigued by your mod­el rail­way designs. So much so I have pur­chased any­rail. In the New Year we are mov­ing to a new house which I agreed to as long as I had some­where for my OO gauge track. As we are down siz­ing there is no room in the inn as they say for my lay­out. Any­way my cur­rent lay­out was scratch built without any plans to fit half my gar­age. It will have to be rebuilt in its entirety. My plan is to have a large work­shop built in the garden so i was research­ing dif­fer­ent lay­outs to encom­pass many points and a turntable. There are four ovals and an inner track using Hornby 1St ব্যাসার্ধ. I also use Horn­by’s Rail­Mas­ter to con­trol my lay­out and have had 6 engines run­ning at once. To come to the point I am really impressed with your lay­outs and to more of an insight in the dif­fer­ent levels of track I wondered if you could provide a 3D view of them. Also would I have your per­mis­sion to rep­lic­ate (prob­ably with a bit of tinker­ing) one of your lay­out designs.

Regards

Jim Shef­field

উত্তর
JSজন Scaife

Hi Jim

Of course you’re wel­come to rep­lic­ate the lay­outs — they’re there to inspire and to be used. I’m not sure a “track design” could be copy­righted even if I was that way inclined. As it is, everything here is under “Cre­at­ive Com­mons” so you can pretty much do what you like with it (oth­er than claim it as your own and try to make money from it). I’d be really pleased to see the res­ults of whatever you build.

Most of the lay­outs I’ve put online don’t have any over­lap­ping sec­tions so could be built flat or with gradi­ents as desired but this loop obvi­ously does need gradi­ents. Your best bet for a full view is to down­load the any­rail file and use the 3D view­er in any­rail to get the angle of view you want. I believe any­rail can also export to some oth­er formats which might be use­ful too?

উত্তর